Perma Distributor PRO MP-6, Руководство по эксплуатации

Страница: 32 / 80

perma PRO C - 5 -
2. Safety Instructions
2.1 Persons Responsible for Safety
♦ The operator or his safety officer must warrant,
ƒ
that all the relevant regulations, instructions and laws are adhered to;
ƒ
that only qualified personnel will work with and on the lubricator;
ƒ
that unauthorized personnel are not allowed to work with and on the lubricator;
ƒ
that the safety regulations are adhered to when mounting the lubricator or during maintenance.
2.2 General Safety Instructions
♦ We are not laying claim to completeness as regards these safety instructions. Please contact perma-tec
Customer Service if you have any queries or problems.
♦ At the time of delivery the lubricator is in line with state-of-the-art technology and in principle is considered
to be safe to operate.
♦ Dangers emanate from the lubricator for persons, the lubricator itself and for other material assets of the
operator if:
ƒ
unqualified personnel operates the lubricator;
ƒ
the lubricator is used inappropriately and for operations that it was not intended to be used for;
ƒ
the lubricator setting / variation is incorrect;
ƒ
the lubricator is opened by force while in operation;
ƒ
the lubricator is not mounted with the perma mounting device;
ƒ
the tube connection to the lubrication point was not carried out and attached correctly.
♦ Operate the lubricator only when it is in perfect condition.
♦ Retrofitting, changing, or reconstructing the lubricator is not allowed. perma-tec must be consulted first.
♦ Only original tube connections and connectors from perma-tec can be used on or with the lubrication system
since these will withhold high pressures of up to 25 bar (360psi).
♦ Only an original connecting cable from perma-tec can be used to connect the lubricator to your control system
and your equipment.
♦ Ambient media, especially chemically aggressive substances, can attack seals and plastic.
2.3 Safety Information for perma PRO C
Safety during Installation and Maintenance
♦ Ensure that all workstations and traffic routes are clean and safe!
♦ Ensure that the relevant regulations and guidelines are adhered to when the installation or maintenance work
is carried out in places where danger of falling exists.
♦ Ensure that the relevant safety and operating instructions are observed when the lubricators are installed or
serviced on machines or in factories (e.g. to stop the machine).
Safety When Handling the PRO LC unit
♦ Avoid contact of lubricant with eyes, skin, and clothing!
♦ Avoid swallowing of lubricant!
♦ Prevent lubricant from getting into soil or sewer system!
♦ Observe safety data sheets of lubricants!
You may also download data sheets of lubricants supplied by perma-tec from perma-tec´s web page
(www.perma-tec.com) or ask your local supplier.
♦ Lubricant on traffic ways will increase the danger of slipping! Therefore, immediately clean lubricant from floors
with special cleaner.
♦ Only use original PRO LC units from perma-tec!
Safety When Working on Electrical Equipment
♦ Works on electrical equipment may only be carried out by qualified personnel!
♦ Danger of sparking and fire hazard in case of a short-circuit!
♦ Do not work on live parts of the electrical equipment!
♦ Protect live parts of the electrical equipment according to the voltage, frequency and application type by
insulation and by their position and arrangement!