Perma Distributor PRO MP-6, Руководство по эксплуатации

Страница: 30 / 80

perma PRO C - 3 -
1. Miscellaneous
About this Operating Manual
♦ This operating manual is intended for the safe operation of the perma PRO C automatic lubricator.
It contains safety instructions which must be adhered to.
♦ Everyone who works on or with the lubricator must have access to this operating manual during their shift.
They must also pay attention to all relevant instructions and notices.
♦ The operating manual must always be kept complete and in easy to read condition.
Terms Used
♦ Lubrication system perma PRO C
In the following text, the “lubrication system perma PRO C” will either be called “lubricator” or by its name
“perma PRO C”.
♦ Lubrication Canister
In the following text, the “Lubrication Canister” will be called “PRO LC unit”.
The user can order the PRO LC unit with different lubricants and in sizes 250 cm
3
and 500 cm
3
.
Usage of Safety Instructions
All safety instructions in this operating manual are standardized.
Danger Signs
This sign warns you of any danger to people’s health or to subjects.
Tips
This sign alerts you to application tips which will help you in doing certain tasks quicker and safer.
1.1 Delivery / Content
♦ perma PRO C will be delivered according to customer specifi cations in regards to type of grease and size /
content of PRO LC unit. You only have to assemble it and connect it to your control system (e.g. a PLC)
using the connecting cable. Furthermore, you have to set the required discharge period at the lubricator and
connect the perma PRO C to the supply voltage.
♦ Connecting cable for connecting lubricator and control system.
♦ Mounting device and screws included.
♦ Operating instructions and EC Conformity declaration included.
♦ Upon delivery, make sure to check if the delivered goods correspond to your order.
perma-tec GmbH & Co. KG will not accept liability for subsequent claims of any shortcomings.
♦ Please immediately forward any claims:
ƒ
of noticeable transport damage: directly to the forwarder.
ƒ
of noticeable faults, shortcomings or defects: directly to your perma distributor.
1.2 Storage
When the lubricators are not immediately installed, you must ensure appropriate
storage conditions in dry, dust free places with a temperature of +20 °C ± 5 °C
(+68 °F ± 9 °F). Make sure that PRO LC units are not stored longer than one year.
For drive unit (1) protection during storage: Do not remove protection cover (2),
disc (3), and plug (4) until you are ready to install the system (see chapter 6.2).
(4)
(2)
(1)
(3)