background image

 140

Adding/Editing Users

Session 1, 2, 3, 4

You can configure up to four (4) sessions that the user can select from to 
connect to a specific host after that user has successfully logged into the 

IOLAN (used only on serial ports configured for the 

Terminal

 profile).

Data Options:

z

None

—No connection is configured for this session.

z

Telnet

—For information on the Telnet connection window, see 

Telnet 

Settings 

.

z

SSH

—For information on the SSH connection window, see 

SSH Settings 

.

z

RLogin

—For information on the RLogin connection window, see 

Rlogin 

Settings 

.

Default: 

None

Settings Button

Click this button to configure the connection parameters for this session.

Connect 

Automatically

Specify whether or not the session(s) will start automatically when the user 

logs into the IOLAN. 

Default:

 Disabled

Host

The host that the user will connect to in this predefined session. 

Default:

 None

TCP Port

The TCP port that the IOLAN will use to connect to the host in this predefined 

session. 

Default:

 Telnet-23, SSH-22, Rlogin-513

Содержание IOLAN MDC












































































































































































































































































































































































































































































































Отзывы: