Perle IOLAN MDC Скачать руководство пользователя страница 230

Страница: 230 / 491

226

Serial Port Profiles

Enable Magic

Negotiation

Determines if a line is looping back. If enabled (

), random numbers are sent

on the link. The random numbers should be different, unless the link loops
back.

Default:

Disabled

Idle Timeout

Use this timer to close a connection because of inactivity. When the

Idle

Timeout

expires, the IOLAN will end the connection.

Range:

0-4294967 seconds (about 49 days)

Default:

0 (zero), which does not timeout, so the connection is permanently

open.

Direct Connect

Specify this option when a modem is not connected to this serial port.

Default:

Enabled

Dial In

If the device is remote and will be dialing in via modem or ISDN TA, enable

this parameter.

Default:

Disabled

Dial Out

If you want the modem to dial a number when the serial port is started, enable
this parameter.

Default:

Disabled

Dial In/Out

Enable this option when you want the serial port to do either of the following:

accept a call from a modem or ISDN TA

dial a number when the serial port is started

Default:

Disabled

MS Direct Host

Specify this option when the serial port is connected to a Microsoft Guest
device.

Default:

Enabled

MS Direct Guest

Enable this option when the serial port is connected to a Microsoft Host device.

Default:

Disabled

Dial Timeout

The number of seconds the IOLAN will wait to establish a connection to a
remote modem.

Range:

1-99

Default:

45 seconds

Dial Retry

The number of times the IOLAN will attempt to re-establish a connection with
a remote modem.

Range:

0-99

Default:

Modem

The name of the predefined modem that is used on this line.

Phone

The phone number to use when

Dial Out

is enabled.

Содержание IOLAN MDC












































































































































































































































































































































































































































































































Результаты поиска

Содержание IOLAN MDC

Отзывы:

Perle IOLAN MDC, Руководство пользователя, Страница: 230 / 491

Результаты поиска

Содержание IOLAN MDC

Отзывы: