manualshive.com logo in svg

Perle IOLAN MDC, Руководство пользователя, Страница: 155 / 491

Поделиться
Скачать
Perle IOLAN MDC Скачать руководство пользователя страница 155

 151

Serial Port Profiles

SOF1 Character

When enabled, the Start of Frame character defines the first character of the 

frame, any character(s) received before the Start of Frame character is ignored. 

Range: hexadecimal

 0-FF 

Default:

 0

SOF2 Character

When enabled, creates a sequence of characters that must be received to create 

the start of the frame (if the SOF1 character is not immediately followed by the 
SOF2 character, the IOLAN waits for another SOF1 character to start the 

SOF1/SOF2 character sequence). 

Range: 

hexadecimal 0-FF 

Default:

 0

Transmit SOF 

Character(s)

When enabled, the SOF1 or SOF1/SOF2 characters will be transmitted with 

the frame. If not enabled, the SOF1 or SOF1/SOF2 characters will be stripped 

from the transmission. 

Default:

 Disabled

EOF1 Character

Specifies the End of Frame character, which defines when the frame is ready to 

be transmitted. The actual transmission of the frame is based on the Trigger 

Forwarding Rule. 

Range: 

hexadecimal 0-FF 

Default:

 0

EOF2 Character

When enabled, creates a sequence of characters that must be received to define 
the end of the frame (if the EOF1 character is not immediately followed by the 

EOF2 character, the IOLAN waits for another EOF1 character to start the 

EOF1/EOF2 character sequence), which defines when the frame is ready to be 
transmitted. The actual transmission of the frame is based on the Trigger 

Forwarding Rule.

Range: 

hexadecimal 0-FF 

Default:

 0

Trigger 

Forwarding Rule

Determines what is included in the Frame (based on the EOF1 or EOF1/EOF2) 

or Packet (based on Trigger1 or Trigger1/Trigger2). Choose one of the 

following options:

z

Strip-Trigger

—Strips out the EOF1, EOF1/EOF2, Trigger1, or 

Trigger1/Trigger2, depending on your settings.

z

Trigger

—Includes the EOF1, EOF1/EOF2, Trigger1, or 

Trigger1/Trigger2, depending on your settings.

z

1

—Includes the EOF1, EOF1/EOF2, Trigger1, or 

Trigger1/Trigger2, depending on your settings, plus the first byte that 
follows the trigger.

z

2

—Includes the EOF1, EOF1/EOF2, Trigger1, or 

Trigger1/Trigger2, depending on your settings, plus the next two bytes 
received after the trigger.

Default:

 Trigger

Содержание IOLAN MDC












































































































































































































































































































































































































































































































Отзывы:

Нет отзывов