Perle IOLAN MDC Скачать руководство пользователя страница 104

Страница: 104 / 491

100

Introduction

System Name

The

System Name

is used for informational purposes by such tools as the

DeviceManager and is also used in conjunction with the Domain field to

construct a fully qualified domain name (FQDN).

Default:

Terminal Server-xxxxxx (where xxxxxx is the last 6 digits of the

Terminal Server’s MAC address)

Domain

This field is combined with the

System Name

to construct the fully qualified

domain name (FQDN). For example, if the domain is

mycompany.com

and the

Server Name

is set to

accounting

, the FQDN would be

accounting.mycompany.com

Obtain IP Address

automatically using

DHCP/BOOTP

When enabled, the IOLAN will request an IP address from the DHCP/BOOTP

server. By default, when this option is enabled, the IOLAN will also attempt to

retrieve the DNS server, WINS server, and default gateway from the
DHCP/BOOTP server.

Default:

Disabled

Use the following

IP Address

Assign a specific IP address to the IOLAN.

Field Format:

IPv4 address

IP Address

The IOLAN’s unique IPv4 network Interface 1 IP address.

Field Format:

IPv4 address

Subnet Mask

The network subnet mask. For example, 255.255.0.0.

IP Address

The IOLAN’s unique IPv4 network Interface 2 (WLAN) address

Field Format:

IPv4 address

Subnet Mask

The network subnet mask. For example, 255.255.0.0.

Default Gateway

Specify the gateway IP address that will provide general access beyond the
local network.

Field Format:

IPv4 address

Default Gateway

Obtain
Automatically

When DHCP/BOOTP is enabled, you can enable this option to have the

IOLAN receive the Default Gateway IP address from the DHCP/BOOTP
server.

Default:

Enabled

DNS Server

Specify the IP address of a DNS host in your network for host name resolution.

Field Format:

IPv4 or IPv6 address

DNS Server Obtain
Automatically

When DHCP/BOOTP is enabled, you can enable this option to have the
IOLAN receive the DNS IP address from the DHCP/BOOTP server.

Default:

Enabled

WINS Server

Specify the IP address of a WINS (Windows Internet Naming Service) host in

your network for host resolution.

Field Format:

IPv4 address

WINS Server

Obtain

Automatically

When DHCP/BOOTP is enabled, you can enable this option to have the

IOLAN receive the WINS IP address from the DHCP/BOOTP server.

Default:

Enabled

Содержание IOLAN MDC












































































































































































































































































































































































































































































































Результаты поиска

Содержание IOLAN MDC

Отзывы:

Perle IOLAN MDC, Руководство пользователя, Страница: 104 / 491

Результаты поиска

Содержание IOLAN MDC

Отзывы: