PerkinElmer Frontier IR, Руководство пользователя

Страница: 90 / 104

90 . Frontier IR Dual-Range Systems User's Guide
9. Refit the filter wheel to its spindle and secure it with the set screw.
CAUTION
Make sure that you tighten the set screw onto the flat of the shaft.
If the set screw is tightened onto a round portion of the shaft the filter
wheel may loosen.
10. Refit the sample holder onto the baseplate with the knurled screw.
11. Close and secure the main cover.
Refer to steps 11 to 15 on page 82.
12. Select the filter you would like to use in the beam path from the Filter Wheel
drop-down list on the Setup Instrument BeamPath tab in Spectrum software.
NOTE: If you wish to run a background scan with a filter in place, you must set the
Scan
Type to Background on the Setup Instrument Basic tab, rather than using the
Background toolbar button . See the Spectrum on-screen Help for more
information.