PerkinElmer 200A Series Скачать руководство пользователя страница 95

Страница: 95 / 172

Operation

Initial (default) value: blank

Upon entering a memorize spectrum No., the previous spectral data will be

deleted and the new data will be memorized.

When the Xe lamp goes off, press the ENT key and the 1st monitor screen will

return.

The scan monitor screen appears, and spectral acquisition within the set range is

carried out.

SCANNING SPECTRUM NO.: 1 MODE: FL (Em)
Ex: 250 nm Em: *** nm

Pressing ESC key during spectral acquisition will cancel the process. Spectral data

will not be memorized.

The memorize spectrum No. set in the preceding step will be indicated at SCANNING

SPECTRUM NO.

Em is effective within the scan range set above.

When the spectral data memorization is completed, the system returns to the 1st monitor

screen automatically.

Setting of Recorder and Spectrum Output Factors

The following items are settable as factors used in recorder and/or spectrum output.

•

Full scale range of recorder

•

Output speed of recorder

•

Output spectrum data

NOTE:

With an emission spectrum, scattered excitation light, Raman scattering due to solvent, emission due to

solvent or impurities in it, and second (or third) order emission may be superimposed on the emission of

the analyte element. Similarly, an excitation spectrum may be affected by scattered light at the emission

wavelength, by Raman scattering due to solvent, by emission due to solvent or impurities contained in it,

and by second (or third) order scattered light of the excitation beam. These factors must be taken into

consideration when selecting the optimum excitation and emission wavelengths for spectrum acquisition.

Refer to section 3.4 for details.

NOTE:

The excitation and emission spectra output by the Series 200a are not corrected for the wavelength-

dependent sensitivity of the photomultiplier. The obtained spectra therefore differ from the true

excitation and emission spectra of the analyte element.

This difference is especially noticeable at wavelengths below 300 nm.

Full Scale Range of Recorder
a.

Press the RECORD key.

The recorder setting screen appears.

Содержание 200A Series













































































































































































Результаты поиска

Содержание 200A Series

Отзывы:

Похожие инструкции для 200A Series

Бренды по названию

Популярные бренды

PerkinElmer 200A Series, Руководство пользователя

Результаты поиска

Содержание 200A Series

Отзывы:

Похожие инструкции для 200A Series

Бренды по названию

Популярные бренды