PerkinElmer 200A Series Скачать руководство пользователя страница 9

Страница: 9 / 172

Introduction

Failure due to maintenance or repair by other than service personnel qualified by

the manufacturer.

Failure due to relocation or transport conducted not under the supervision of the
manufacturer after the initial installation of the instrument.

Failure due to disassembly, modification or relocation not approved by the

manufacturer.

Failure due to acts of God, including fire, earthquake, storm, flood, lightning, social

disturbance, riot, crime, insurrection, terrorism, war (declared or undeclared),

radioactive pollution, contamination with harmful substances, etc.

Failure of the hardware, or damage to the system software, application software or

data due to computer virus infection.

After disposal of this instrument, after its resale without prior approval from the

manufacturer, consumable parts, and failure of any part that has reached the end

of its service life.

Disclaimer of Warranty

THE MANUFACTURER MAKES NO WARRANTIES, EITHER EXPRESS OR IMPLIED, EXCEPT

AS PROVIDED HEREIN, INCLUDING WITHOUT LIMITATION THEREOF, WARRANTIES AS

TO MARKETABILITY, MERCHANTABILITY, FOR A PARTICULAR PURPOSE OR USE, OR

AGAINST INFRINGEMENT OF ANY PATENT. IN NO EVENT SHALL THE MANUFACTURER BE

LIABLE FOR ANY DIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE,
OR LOSSES OR EXPENSES RESULTING FROM ANY DEFECTIVE PRODUCT OR THE USE OF

ANY PRODUCT.

NO ORAL OR WRITTEN INFORMATION OR ADVICE GIVEN BY THE MANUFACTURER, ITS

DEALERS, DISTRIBUTORS, AGENTS OR EMPLOYEES SHALL CREATE A WARRANTY OR IN

ANY WAY INCREASE THE SCOPE OF THIS WARRANTY.

Содержание 200A Series













































































































































































Результаты поиска

Содержание 200A Series

Отзывы:

Похожие инструкции для 200A Series

Бренды по названию

Популярные бренды

PerkinElmer 200A Series, Руководство пользователя

Результаты поиска

Содержание 200A Series

Отзывы:

Похожие инструкции для 200A Series

Бренды по названию

Популярные бренды