PERCo ST-02 Series, Руководство по сборке и эксплуатации

Страница: 10 / 49

ST-02 Speed gate and STD-02 Double-sided section
9
Figure 4. STD-02 overall view
1 – sliding panel; 2 – filling glass; 3 – glass cover; 4 – central insert;
5 – upper indication block; 6 – side panel; 7 – front panel; 8 – front end indication block;
9 – DC connection cable 1 ; 10 – CAN 1 connection cable; 11 – RC-panel with cable;
12 – power supply cable 2 ; 13 –
Fire Alarm
2 device cable;
14 – lower level of passage sensors; 15 – upper level of passage sensors
The speed gate consists of two sections,
Master
and
Slave
, as well as the RC-panel (11). The
Slave section is connected to the Master section via two DC and CAN connection cables (9, 10).
Each section has a sliding panel (1) and a fixed filling glass (2).
In order to increase the number of passage lanes, it is necessary to install double-sided sections.
Each double-sided section is also equipped with the RC-panel (11). It has two sliding panels (1):
on the Master side and Slave side. Each sliding panel is driven by its electric drive. The Slave
section of the speed gate (the Slave side of the next double-sided section) is connected to the
Master side with two connection cables (9, 10) from the speed gate delivery set (double-sided
section) (see Fig. 4).
1 One pair of DC and CAN cables are supplied with the nearby product.
2
Not included in the standard delivery set.