VisuNet IXD
Mechanical Installation
2
0
2
0
-0
4
31
3.8
AG1 Assembly
3.8.1
Preparation for Floor Mounting with AG1 Housing
Figure 3.6
Distance required between housing/pedestal assembly and wall
Warning!
Proper installation on the floor
It is the installer's responsibility to select a suitable location with sufficient strength to hold the
equipment. It is the installer's responsibility to select the proper screws based on the installa-
tion conditions.
Warning!
Distance between housing and wall
Provide at least 350 mm of space between the housing/pedestal assembly and the left wall.
This is required in order to properly open the housing and connect the IXD components.
Note
When installed in an AG1 housing, the operating temperature of the device decreases to -20
°
C
...+50
°
C (-4
°
F ... +122
°
F).
