VisuNet IXD
Mechanical Installation
2
0
2
0
-0
4
23
Ground Connection from PSU to DPU
The ground connection from the PSU to the DPU is assembled in the factory. If you replace the
DPU or PSU, reestablish the ground connection in the same configuration. Tighten the ground
hardware to 4 Nm.
Figure 3.4
Factory-assembled ground connection from PSU to DPU
Warning!
Connection to the ground bolts
Connection to the ground bolts is mandatory.
Warning!
Customer responsibility to verify grounding path
Check the grounding path after completing system installation.
Warning!
Risk of personal injury and equipment damage
Pinched ground wire.
Ensure that the ground wire does not get pinched between the gland plate and the yoke frame.
