2
0
2
0
-0
4
30
VisuNet IXD
Mechanical Installation
Figure 3.5
Wall mount configuration
Installation Steps
1.
Lay the IXD display-side down on a flat surface.
2.
Remove the 4 x flat-head socket screws from the VESA bracket.
3.
Slide the VESA bracket over and lift it up.
4.
Position the wall mount bracket with the slots facing upward.
5.
Attach 4 x flat-head socket screws and tighten the screws to 4.5 Nm. Apply a small amount of
Loctite 243 to each screw prior to installation.
6.
Mount the two-piece assembly to the wall with 4 x or 6 x screws through the slotted holes.
7.
Lift the IXD and guide the pins through the slots in the VESA bracket.
8.
The IXD will stay in place until the 4 x flat-head socket screws are reinstalled and tightened to
7.5. Nm. Apply a small amount of Loctite 243 to each screw prior to installation.
Wall Mounting the IXD
