Pepperl+Fuchs PS1000-A6-24.20, Техническая информация

Страница: 7 / 46

Power Supply PS1000-A6-24.20
Intended Use
20
21
-1
1
7
3 Intended Use
This device is designed for installation in an enclosure and is intended for the general
professional use such as in industrial control, office, communication, and instrumentation
equipment.
Do not use this power supply in equipment, where malfunction may cause severe personal
injury or threaten human life. If this device is used in a manner outside of its specification,
the protection provided by the device may be impaired.
Function
The device is used to supply field devices with 24 V DC and 20 A.
It is possible to select between the operating modes
parallel use and single use .
Plug in the plug-in jumper to set the operating mode parallel use .
Do not plug in the plug-in jumper to set the operating mode single use .
The device status is indicated by an LED.
The device has a relay contact output for remote monitoring.
The device is mounted on a 35 mm DIN mounting rail according to EN 60715.
Reference Conditions
All parameters are specified at 24V, 20A, 230Vac, 25°C ambient and after a 5 minutes
run-in time unless otherwise noted.