Pepperl+Fuchs PS1000-A6-24.20, Техническая информация

Страница: 10 / 46

20
21
-1
1
10
Power Supply PS1000-A6-24.20
AC Input
5 AC Input
The device is suitable to be supplied from TN-, TT- or IT-mains networks with AC voltage.
For suitable DC supply voltages see chapter 6.
Figure 5.1 Input voltage range
AC input
AC input range
nom. AC 100-
240V 90-
264Vac
264-300Vac
Continuous operation
Occasionally for maximal 500ms
Allowed voltage L or N to earth max. 300Vac Continuous, according to IEC 60664-1
Input frequency nom. 50-60Hz ±6%
Turn-on voltage typ. 82Vac Steady-state value, see Figure 5.1
Shut-down voltage typ. 72Vac Steady-state value, see Figure 5.1
External input protection See recommendations in chapter 4.
AC 100V AC 120V AC 230V
Input current typ. 5.15A 4.26A 2.23A At 24V, 20A, see Figure 5.3
Power factor
1
typ. 0.996 0.996 0.98 At 24V, 20A, see Figure 5.4
Crest factor
2
typ. 1.65 1.63 1.63 At 24V, 20A
Start-up delay typ. 450ms 450ms 450ms See Figure 5.2
Rise time typ. 145ms 145ms 145ms At 24V, 20A const. current load, 0mF load
capacitance, see Figure 5.2
typ. 160ms 160ms 160ms At 24V, 20A const. current load, 20mF
load capacitance, see Figure 5.2.
Turn-on overshoot max. 200mV 200mV 200mV In single use mode, see Figure 5.2
1
The power factor is the ratio of the true (or real) power to the apparent power in an AC circuit.
2
The crest factor is the mathematical ratio of the peak value to RMS value of the input current waveform.