Pepperl+Fuchs PS1000-A6-24.20, Техническая информация

Страница: 23 / 46

Power Supply PS1000-A6-24.20
Terminals and Wiring
20
21
-1
1
23
14 Terminals and Wiring
The terminals are IP20 finger safe constructed and suitable for field- and factory wiring.
Daisy chaining
Daisy chaining (jumping from one power supply output to the next) is not allowed.
Use a separate distribution terminal block as shown in Figure 14.1.
Figure 14.1 Using distribution terminals
Input Output DC-OK-Signal
Type Screw terminals Screw terminals Push-in terminals
Solid wire Max. 6mm
2
Max. 6mm
2
Max. 1.5mm
2
Stranded wire Max. 4mm
2
Max. 4mm
2
Max. 1.5mm
2
American Wire Gauge AWG 20-10 AWG 20-10 AWG 24-16
Max. wire diameter (including
ferrules)
2.8mm 2.8mm 1.6mm
Recommended tightening torque Max. 1Nm, 9lb-in Max. 1Nm, 9lb-in –
Wire stripping length 7mm / 0.28inch 7mm / 0.28inch 7mm / 0.28inch
Screwdriver 3.5mm slotted or
cross-head No 2
3.5mm slotted or
cross-head No 2
3mm slotted to open
the spring