manualshive.com logo in svg

Pepperl+Fuchs KFD Series, Руководство пользователя, Страница: 77 / 92

Поделиться
Скачать
Pepperl+Fuchs KFD Series Скачать руководство пользователя страница 77

HART Multiplexer System KFD*-HM*-16

Operation

201

8-04

77

Third Byte

Scan fault

The byte indicates an OR link for all the faults detected during the scanning process.

Example: If one field device is detected as 

Disappeared

 and another as 

Mismatched

, 

these two bits are set at the same time. The bit by bit coded information is shown in 

the following table:

Bit

Status 

Meaning

Action

7

Reserved

Reserved.

6

Searching

Field device is searched for due 

to the 

Disappeared

 report.

• Check the cabling.
• Check the field device.

5

Disappeared

Field device is no longer 

responding.

4

Appeared

Field device is responding 

again.

Check the cabling.

3

Mismatched

Another field device has 

responded instead.

Field device was replaced with 

another field device. Check the 

field device, rebuild 

signal loops.

2 to 0

Reserved

Reserved.

Table 7.8

Note!

Additional information can be found in /1/, see chapter 9.3.

Содержание KFD Series





























































































Отзывы:

Нет отзывов