Pepperl+Fuchs KFD Series Скачать руководство пользователя страница 18

Страница: 18 / 92

018-

HART Multiplexer System KFD*-HM*-16

Mounting and Installation

4.3

Mounting

Mounting in a Non-Hazardous Area

Mounting the Device

Snap the device onto the DIN mounting rail from

above

. See the next figure.

Mounting in Areas that Require Equipment Protection Level Gc

Mounting the Device

Snap the device onto the DIN mounting rail from

above

. See the figure below.

Mounting Terminal Blocks

Attach the terminal blocks or remove the terminal blocks.

Danger!

Explosion hazard from wrong mounting

The device safety can be impaired by external environmental influences and by mechanical

stress. That can lead to sparking that can ignite a surrounding potentially explosive

atmosphere.

Mount the device in a surrounding enclosure that complies with IEC/EN 60079–0and that is

rated with the degree of protection IP54 according to IEC/EN 60529.

CORRECT:

Device snapped on vertically from above.

INCORRECT:

Device snapped on at an angle from the side.

This may result in damage to the contacts and the

failure of the device.

Figure 4.3

Содержание KFD Series





























































































Результаты поиска

Содержание KFD Series

Отзывы:

Pepperl+Fuchs KFD Series, Руководство пользователя, Страница: 18 / 92

Результаты поиска

Содержание KFD Series

Отзывы: