Pepperl+Fuchs FieldConnex F2D0-MIO-Ex12.FF Series, Руководство пользователя

Страница: 9 / 57

Multi-Input/Output Device
Product Specifications
2
017-
06
9
Binary Input Mode
The device samples the inputs in 2 independent cycles. Channels 1, 4, 7, and 10 are intended
to be used for sensing multiplexed binary inputs as vibrating forks, NAMUR sensors, or
mechanical switches. Channel 1 can also be configured to be used as a frequency or counter
input. If the channel 1 frequency or counter input is activated, channels 4, 7, and 10 are
deactivated. The ON-time of channel 1, 4, 7, and 10 can be adjusted individually between
10 ms ... 11 000 ms. The total cycle time is the sum of the 4 individual ON-times.
Channels 2, 3, 5, 6, 8, 9, 11, and 12 are intended to be used for sensing multiplexed binary
inputs as NAMUR sensors and mechanical switches. The sampling time of 10 ms is not
adjustable. The total cycle time is calculated as follows: number of used channels * 10 ms
(minimum 50 ms). If all 8 sensors are used, the total cycle time is 80 ms.
Refer to the technical data of the MIO for the specification of compatible sensors. A list of
compatible NAMUR sensors is available on the Fuchs website.
Sensor Input Mode (Including Frequency and Counter)
Chann
el Sensor Input Modes Frequency Input Mode Counter Input Mode
1 Vibration fork or
sensor/switch
Frequency input Counter input
2 Sensor/switch Sensor/switch Sensor/switch
3 Sensor/switch Sensor/switch Sensor/switch
4 Vibration fork or
sensor/switch
Disabled Disabled
5 Sensor/switch Sensor/switch Sensor/switch
6 Sensor/switch Sensor/switch Sensor/switch
7 Vibration fork or
sensor/switch
Disabled Disabled
8 Sensor/switch Sensor/switch Sensor/switch
9 Sensor/switch Sensor/switch Sensor/switch
10 Vibration fork or
sensor/switch
Disabled Disabled
11 Sensor/switch Sensor/switch Sensor/switch
12 Sensor/switch Sensor/switch Sensor/switch
MUX
Zone 1
- +
S
MAU
µC
MUX
CH1
+ - + - + - + - + - + - + - + - + - + - + - + -
CH4 CH7 CH10
CH2 CH3 CH5 CH6 CH8 CH9 CH11 CH12
PI
FB/SP