Pentair IntelliFlo VS+SVRS Скачать руководство пользователя

Страница: 28 / 56

INTELLIFLO

VS+SVRS and INTELLIPRO

VS+SVRS Variable Speed Pump Installation and User’s Guide

AntiFreeze

This feature allows you to set a speed (1100 RPM -3450 RPM) that will run when the IntelliFlo

VS+SVRS Pump goes into anti freeze mode. The temperature level that you wish anti freeze mode to

start can also be set.

IMPORTANT NOTE

: This feature is for protection of the pump. It should not be depended upon for

freeze protection of the pool. Certain situations could cause the pump to sense a different temperature

than actual air temperature. Your automation systems air temperature sensor should be used to sense

actual temperature. For example, if the pump is located indoors, the temperature of the room does not

indicate the outdoor temperature. The pump does not sense the water temperature.

To access the AntiFreeze menu:

1. Check that the green power LED is on.

2. Press the

Menu

button. “Settings” is displayed.

3. Use the

Down

arrow button to scroll to “AntiFreeze”.

4. Press the

Select

button. The factory default is AntiFreeze “Enabled“.

5. To disable AntiFreeze. Press the

Select

button, “Enabled” will highlight.

6. Use the

arrow button. “Disabled” is displayed.

7. Press the

Enter

button.

To program AntiFreeze when enabled:

8. Press the

Down

arrow button.

“Set Speed” is displayed. The factory default is 1100 RPM.

9. Press the

Select

button to change the setting. The cursor will highlight the first column

(ones).

10. Use the

Up or Down

arrow button to select 1100 - 3450 RPM.

11. Press the

Enter

button to save the setting.

12. Press the

Down

arrow button. “Pump Temperature” is displayed.

This is the temperature the

pump will activate AntiFreeze. The factory default is 40° F (4.4° C).

13. Press the

Select

button to change the setting. The cursor will highlight the first column

(ones).

This setting can be changed from 40° F to 50° F (4.4° C - 10° C).

14. Press the

Enter

button to save the setting.

Note:

To cancel any changes, press the

Escape

button to exit without saving.

15. Press the

Escape

button to exit.

Содержание IntelliFlo VS+SVRS

























































Результаты поиска

Содержание IntelliFlo VS+SVRS

Отзывы:

Похожие инструкции для IntelliFlo VS+SVRS

Бренды по названию

Популярные бренды

Pentair IntelliFlo VS+SVRS, Инструкция по установке и эксплуатации

Результаты поиска

Содержание IntelliFlo VS+SVRS

Отзывы:

Похожие инструкции для IntelliFlo VS+SVRS

Бренды по названию

Популярные бренды