21
INTELLIFLO
®
VS+SVRS and INTELLIPRO
®
VS+SVRS Variable Speed Pump Installation and User’s Guide
20
INTELLIFLO
®
VS+SVRS and INTELLIPRO
®
VS+SVRS Variable Speed Pump Installation and User’s Guide
Priming
(Continued)
3. Press the
Select
button. The factory default is set to priming “Enabled“.
4. To disable priming, press the
Select
button.
5. Use the
Up
arrow button. “Disabled” is displayed.
6. Press the
Enter
button.
7. Press the Down Arrow button. Screen will read “Max Priming Time”. Factory default is set
to 11 minutes.
8. Press the
Select
button to change the setting. The cursor will highlight the minutes column.
9. Use the Up or Down arrow button to change the time from 1 minute to 30 minutes..
10. Press the
Enter
button to save the setting.
11. Press the
Down arrow
button. The screen will read “Primed Sensitivity”. The default for
this setting being “1”.
12. Press the
Select
button to change the setting. The cursor will highlight the number.
13. Use the up or
Down arrow
button to change the time from 1% to 100%. Increasing the
number makes the Priming less sensitive.
14. Press
Enter
to save.
15. Press the
Down arrow
button. Screen will read “Priming Delay”. The default for this
setting is 20 seconds.
16. Press the
Select
button to change the Setting.
17. Use the
Up or Down arrow
button to change the setting from 1 second to 10 minutes.
Increasing the Priming Delay causes the pump to stay in the priming mode
longer thus increasing the amount of time the pump operates with the SVRS
off.
18. Press the
Enter
button to save the setting.
Note:
To cancel a change, press the Escape button instead of the Enter button to exit without
saving.
19. Press the
Escape
button to exit.
