Pentair Fleck 3200NT, Руководство по обслуживанию

Страница: 9 / 52

Page 9
Timer Operation
3. Set Regeneration Time
A non-flashing colon between two sets of numbers identifies
the Regeneration Time display. Set the desired time of day that
you want Regeneration to occur.
— Press the Set Up and Set Down buttons to adjust
this value.
— Press the Extra Cycle button to proceed to the
next step.
4. Set Regeneration Day Override
Us this display to set the maximum amount of time (in days)
the unit can be In Service without a Regeneration.
— For System 4 Time Clock regeneration mode the
system regenerates at the time set in Step 4 after
the number of days programmed in this step.
— For all other System Types (4 Meter Immediate,
4 Meter Delayed, 5, 6, 7, 9) the system regenerates
after the number of days programmed in this step
unless the meter initiates a Regeneration cycle earlier.
— Press the Extra Cycle button to proceed to the next
step.
Timer programming is complete and exits from the Program-
ming Mode. Normal operation resumes.