Pentair Fleck 3200NT, Руководство по обслуживанию

Страница: 14 / 52

Page 14
Master Programming Mode
When the Master Programming Mode is entered, all available option setting displays may be viewed and set as
needed. Depending on current option settings, some displays cannot be viewed or set.
Entering Master Programming Mode
Set the Time Of Day display to 12:01 P.M. Press and hold the Set Up and Set Down buttons together until the
Program indicator turns on (about 5 seconds). Depending on current option settings, some displays cannot be
viewed or set.
Exiting Master Programming Mode
Press the Extra Cycle button once per display until all are viewed. The Program Mode is exited and normal dis-
play resumes.
Resetting Permanent Programming Memory
Press and hold the Set Up and Set Down buttons (for about 25 seconds) until the Time Of Day display resets to
12:00 P.M. All option settings reset to default values. Control programming must be reset as necessary.
1. Valve Model (No Display Code)
This program step selects valve models: 2750, 2850, 2900, 3150, and 3900
— Use Set Up or Set Down buttons to adjust this value.
— Press the Extra Cycle button.
2. Regenerant Flow (No Display Code)
This program step is used to set the Regeneration Type. Availability is dependent on valve model chosen.
Downflow Setting: [ dF ]
Upflow, Brine First Setting: [ UFbF ]
Upflow, Fill First Setting: [UFFF ]
— Use Set Up or Set Down buttons to adjust this value.
— Press the Extra Cycle button.
CAUTION: Before entering Master Programming, please contact your local professional water dealer.