35
USING THE “CAL” COMMAND
(cont’d.)
64 Parity ( odd) ?
1
{0 = none, 1 = odd, 2 = even}
65 Echo (no Ech)? 0
{0=no echo, 1=echo}
66 Comm Address (0)? 0
{0 to 255}
67 Power Diagnostics (0)? 0
{0=no, 1=yes}
Configuration Step (70)? 70*
71 Set Time Flag ( 1)? 1
{Selections on page 7}
72 Set Time (135056)? 135056
{Enter time HHMMSS}
73 Set Date (11894)? 110894
{Enter date MMDDYY}
74 Sleep Time ( 0.0)? 0
{Sleep time in minutes (.5 to 12)}
Configuration Step (80)? 80*
81 Print Slot (65)? 65
{Print codes on p. 10}
82 Print Slot (30)? 30
{Print codes on p. 10}
83 Print Slot (65)? 65
{Print codes on p. 10}
84 Print Slot (99)? 99
{Print codes on p. 10}
Calibration Step (0)? 0
Diagnostic...
8.7.6.5.4.3.Wait for update display.2.1.0.
Wait.... Ready for Command
At these steps:
1. Pressing return will enter that calibration category.
2. Keying any of the following numbers (10,20,30,40,50,60,70,80) and pressing return will
access that category.
3. Keying in a "9" will return to base selection.
4. Keying in "0" and pressing return will end calibration.