Pennsylvania Scale Company 7600 Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 53

Pennsylvania Scale Company 7600 Скачать руководство пользователя страница 40

40

Model 7600 15 Digit ID, 2 Print Formats

This version 7600 is designed to allow the storage and output of 2 print formats and entry of a
15-digit numeric Part ID.

Operating Instructions:

Entering An ID Number:

1. Press the ID button and key in the ID Number. During the keypad ID input, the display

will show the 6 right-most digits of the ID.

2. If the ID is greater than 6 digits, the display will shift the digits to the left. Entering a 16

th

digit will clear the ID allowing the operator to re-enter the ID without leaving ID input
mode.

1. Pressing the “.” (Decimal) button during ID input will enter a “-“ (Hyphen).

Printing:

1. To print the 1

st

stored print format press the PRINT/8 button.

2. To print the 2

nd

stored print format press the PRINT/7 button.

Note: All other scale functions are available and operate normally. For more information
on other 7600 scale functions please refer to the 7600 Operators Manual.

MODEL 7600 SERIES RS-232 SCALE COMMANDS

Unique to this model

The Following RS-232 Commands found in the 7600 calibration manual are not
available on this version

Input Commands

CFC
CFL
CFT
CAL
CLD
CLP
CLU
CLW
CLE
CFS
CLS
CLM
CFN

NOTE: All RS-232 commands for counting functions have been changed as listed above or
disabled. Please refer to the 7600 Calibration manual for a complete list of all RS-232
commands. All commands and parameters must be separated by spaces. The entire
command string must be terminated with a carriage return.

«
...
38
39
40
41
42
...
»

Содержание 7600






















































Отзывы:

Нет отзывов