Pella Insynctive Lifestyle Series Скачать руководство пользователя страница 4

Страница: 4 / 16

Pella

Lifestyle Series Motorized, Integrated Blinds and Shades with Insynctive | 4

SPECIFICATIONS

Frequency:

433.92 MHz (Insynctive

)

Operating Temperature:

32° – 120°F (0° – 49°C)

Operating Humidity:

5% – 95% RH noncondensing

Battery:

Rechargeable Lithium Ion battery pack

Typical Battery Life:

8 years (may vary with use)

PELLA® LIFESTYLE SERIES MOTORIZED, INTEGRATED BLINDS or

SHADES help to improve the comfort and convenience of your

home. BLIND or SHADE may be controlled with a remote, app or

a compatible home automation system. The slats of BLIND may be

tilted to control privacy or the amount of light entering a room.

BLIND or SHADE includes a power unit which is located at

the bottom of the Hinged Glass Panel (HGP) and contains a

rechargeable battery. The battery can be charged by:

1) the solar panel on the exterior side of the unit, requiring

approximately 3 hours of direct sunlight a day, OR

2) a Pella

Lifestyle Series WALL CHARGER that magnetically

couples to the HGP. A wire provides power from the battery to

the motor located in the headrail of BLIND or SHADE.

Product Overview

Содержание Insynctive Lifestyle Series

















Результаты поиска

Содержание Insynctive Lifestyle Series

Отзывы:

Похожие инструкции для Insynctive Lifestyle Series

Бренды по названию

Популярные бренды

Pella Insynctive Lifestyle Series, Руководство по эксплуатации продукта

Результаты поиска

Содержание Insynctive Lifestyle Series

Отзывы:

Похожие инструкции для Insynctive Lifestyle Series

Бренды по названию

Популярные бренды