Pella Insynctive Lifestyle Series Скачать руководство пользователя | Manualshive

Страница: 16 / 16

background image

Pella

®

Lifestyle Series Motorized, Integrated Blinds and Shades with Insynctive | 16

This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. However, there is no guarantee that interference will not occur

in a particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following measures:

  •  Reorient or relocate the receiving antenna.
  •  Increase the separation between the equipment and receiver.
  •  Connect the equipment to an outlet on a different circuit from the receiver.
  •  Consult the dealer or an experienced radio/TV contractor for help.

Changes or modifications not expressly approved by Pella Corporation could void the user’s authority to

operate the equipment.

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the

following two conditions: (1) this device may not cause interference, and (2) this device must accept any

interference, including interference that may cause undesired operation of the device.

Cet appareil est conforme avec Industrie Canada exempts de licence standard RSS. L’opération est

soumise aux deux conditions suivantes : (1) cet appareil ne peut causer d’interférences, et (2) cet

appareil doit accepter toute interférence, y compris les interférences qui peuvent causer un mauvais

fonctionnement de l’appareil.

FCC ID: SO7-206B0000

IC: 11009A-206B0000

FCC ID: SO7-209L0000

IC: 11009A-209L0000

A two-year limited warranty comes standard with purchase. For complete warranty details,

visit Pella.com/Warranty.

FCC Compliance and Industry Canada

Limited Warranty

© 2020 Pella Corporation

ILSPG0920 | W13194

«
...
14
15
16

Содержание Insynctive Lifestyle Series

















Отзывы:

Нет отзывов

Похожие инструкции для Insynctive Lifestyle Series

Classic Collection 2" Metro

Бренд: Lafayette Страницы: 9

Бренд: Ziptrak Страницы: 4

1-1/2" Headrail 1" Corded Aluminum Blind

Бренд: RICHVIEW Страницы: 2

Бренд: Jysk Страницы: 15

Бренд: Jysk Страницы: 20

Бренд: Jysk Страницы: 20

Бренд: Jysk Страницы: 40

Бренд: Jysk Страницы: 40

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды