Aluminumblind
L
max
L
max
L
max
1-1/2" Headrail 1" Corded Aluminum Blind Installation and Care Instruction
1
1-1/2" Headrail 1" Corded Aluminum Blind Installation and Care Instruction
1. Identify your aluminum blind and parts
(your parts may vary, depending on the custom request & size of the blind
you are purchasing.
Wand
Hidden brackets & screws
Box brackets & screws
(optional)
Extension brackets
(optional)
Spacers (optional)
Optional - Add a spacer behind the
hidden bracket or the box bracket if
needed.
Hold down brackets
& screws (optional)
Center support & screws
(optional with the box brackets,
used on the larger blinds)
Cord cleat & screws
Aluminum Blind
2. Tools you may need
(not included)
•
Drill with bits
•
Screwdriver
•
Metal tape measure
•
Pen
•
Mark the bracket locations, making sure the brackets will not interfere with any mechanism
or other internal headrail parts. The outermost brackets should be installed about 1/4 inch
from each end of the blind. If you have more than 2 hidden brackets, install all remaining
brackets towards the center of the blind.
•
Install the brackets using screws (included) and tighten them completely.
•
Make sure all brackets are aligned and level with each other.
3A. Install the blind with the hidden brackets
(or choose to install the blind with the box brackets, refer to step 3B~5B.)
•
Install the blind with the extension brackets (optional)
o
Install the extension bracket with at least 2 screws.
o
Attach the hidden brackets to the extension brackets
with the screws.
Inside Mount
Outside Mount
Extension bracket
4A. Install the blind
•
Fit the front lip of the headrail over the hook on the front of the hidden brackets.
•
Push the blind toward the back of the brackets with a "click".
5A. How to remove the blind from the hidden brackets
•
Unlock the hidden brackets with a flat head screwdriver.
3B. Install the blind with the box brackets
(or choose to install the blind with the hidden brackets, refer to step 3A~5A.)
• Install the box brackets at the ends of the headrail. Use 2 screws per box bracket.
• One center support is applied when the blind is wider than 48"W, or two center supports for the blind wider than 100"W.
• The spacer
is optional and is installed behind the box bracket when needed.
Inside Mount
Outside Mount
Center Support
Center Support
