Installation
continued…
Required Tools
measuring
tape
drill with
2mm bit
phillips bit or
screwdriver
pencil
knife
How to install your
#65101-40168-E
Dual Blinds Cordless
(Roller Blinds with Raceway)
Difficulty:
How to install your
#65101-40168-E
Dual Blinds Cordless
(Roller Blinds with Raceway)
Difficulty:
Included Hardware
The hardware can be found in
the small hardware box included
with your blind.
1
2
Traditional Hold
Down Bracket
(Optional)
32mm Hexagon
Screw
(for Mounting Bracket)
Mounting Brackets
(for Outside Mount)
Handle
Blind Bracket Cover
19mm Round Head
Screw
1
Blind Bracket Installation
Installing inside the window frame
①
②
③
④
Measure 75mm in from top left and top right of where the
blind will sit, and mark where the screws will go.
When installing the mounting bracket, the distance from the
bracket’s mounting hole to the edge of the window frame
should be at least 19mm.
Make sure all brackets line up with each other horizontally.
Each bracket will require two 32mm hexagon screws for the
installation.
If more brackets are supplied, space them evenly between
the first two brackets.
19mm
Installing outside the window frame
1
Blind Bracket Installation
Top Light Guard
Holder
(for Inside Mount)
6
6
3
Insert the top light guard holder horizontally into the groove at the backside of raceway
and turn 90 degrees to lock in the raceway groove. Then insert the top light guard into
the groove of the top light guard holder.
Backside of Raceway
