Required Tools
measuring
tape
drill with
2mm bit
phillips bit or
screwdriver
pencil
knife
How to install your
#65101-40156
Cordloop
(Roller Blinds with No top treatment)
Difficulty:
19mm Round Head
Screw
Blind Bracket
(on Clutch end
for Inside Mount)
Blind Bracket
(on End Plug end
for Inside Mount)
Blind Bracket
Cover
Traditional Hold
Down Bracket
(Optional)
Included Hardware
The hardware can be found in
the small hardware box included
with your blind.
1
Blind Bracket Installation
①
②
③
Installing inside the window frame…
When installing the blind bracket, the distance from the bracket’s front mounting hole to the
front edge of the window frame should be at least 19mm.
Make sure both blind brackets line up with each other horizontally.
First fit the blind bracket cover over the blind bracket, and then screw brackets into wall.
Each blind bracket will require two 32mm round head screws for the installation.
①
②
③
④
Installing outside the window frame…
Blind Brackets Installation Tips…
When installing the blind bracket, the distance from the bracket’s front mounting hole to the
front edge of the window frame should be at least 19mm.
Make sure both blind brackets line up with each other horizontally.
Each blind bracket will require two 32mm round head screws for the installation.
Fit the blind bracket cover over the blind bracket.
①
②
The top & bottom of left & right blind brackets should be at the same horizontal line.
The front & back of left & right blind brackets should be at the same horizontal line.
32mm Round
Head Screw
(for Blind Bracket)
1
④
≥19mm
≥19mm
