Pella
®
Lifestyle Series Motorized, Integrated Blinds and Shades with Insynctive | 5
DETAILED INSTRUCTIONS
1. Get started.
• To unpack BLIND or SHADE, remove the cardboard corner
protector and bands that secure BLIND or SHADE. It is not
necessary to open the Hinge Glass Panel (HGP) to unpack
your BLIND or SHADE.
• Unpack REMOTE.
2. Prepare SINGLE-CHANNEL REMOTE.
• Slide the battery cover in the direction of the arrow
on the cover.
• Remove battery tab.
• Ensure battery is fully seated.
• Slide the battery cover back into closed position.
3. Pair REMOTE to Pella Lifestyle Series motorized BLIND or SHADE.
• Hold REMOTE up to top cover approximately 6" from the end to
activate pair mode. Move remote from side to side while pressed
up against the glass. BLIND or SHADE will make a quick up/down
motion to indicate it’s in pair mode.
• Press and hold the Up button on REMOTE until BLIND or SHADE
completes a quick up/down motion.
NOTE:
Up/down motion
confirms that REMOTE was successfully paired.
UP
BUTTON
DOWN
BUTTON
LED
LIGHT
CENTER
BUTTON
COVER
REMOTE
MEASURE 6"
FROM END WHERE
WIRE CONNECTS
VIEW WITH HGP CLOSED
Pella
®
Lifestyle Series Motorized, Integrated Blinds or Shades