Pella
®
Lifestyle Series Motorized, Integrated Blinds and Shades with Insynctive | 10
CHARGING BATTERY IN BLINDS AND SHADES
The solar panel requires approximately 3 hours of direct sunlight each
day to charge the battery for BLIND or SHADE operation solely by power
generated from the exterior solar panel. Additional charging is necessary
when the solar panel on the exterior of the unit does not receive
adequate sunlight.
• See Inductive Charging Instructions starting on pg 14.
CARE AND MAINTENANCE
Cleaning Integrated Aluminum Blinds
• First make sure BLIND is in the horizontal (opened) position.
To remove dust, use a vacuum cleaner with an upholstery brush
attachment. You can remove smudges or fingerprints with a
damp cloth.
Cleaning Integrated Cellular Shades
• Begin by making sure SHADE is fully extended. To remove dust, use
a vacuum cleaner with an upholstery brush attachment. Smudges
or fingerprints can be carefully removed with a damp cloth. Never
use cleaners with ammonia — they will damage the fabric. If there
are any exposed threads, trim them and seal them with a fray-check
solution (available at most fabric stores) to reduce fraying. Once
SHADE is clean and dry, raise SHADE.
Cleaning Solar Cell
• For optimal performance of the solar cell, keep the exterior
glass surface clean of dust and dirt. It is recommended that the
exterior glass surface be cleaned every six months or whenever
dirt noticeably builds up on the glass. Use an ammonia-free glass
cleaner and soft cloth.
Additional Instructions
