Pella
®
Lifestyle Series Motorized, Integrated Blinds and Shades with Insynctive | 9
PAIRING TO PELLA
®
INSYNCTIVE
®
BRIDGE
By pairing to BRIDGE, you can control your BLIND or SHADE from
virtually anywhere using the Pella Insynctive app. Download the
Pella Insynctive app from the app store appropriate to your device.
• Press and hold the pair button until the light begins flashing
orange. The pair button is the bottom button located on
the side of the BRIDGE. The BRIDGE is now ready to pair
Insynctive products.
• Touch the top end of REMOTE to BLIND or SHADE cover
approximately 6" from the end where the wire connects.
Move REMOTE back and forth slowly until BLIND or SHADE
completes a quick up/down motion to indicate
BLIND or SHADE has entered pair mode.
• Press and release the Center button on REMOTE three times
within 5 seconds. BRIDGE light will begin blinking green ADD
bridge will issue a long tone to indicate successful pairing.
WITH HOME AUTOMATION
For a list of compatible home automation systems or pairing
instructions, visit ConnectPella.com.
LIGHT
PAIR
BUTTON
TEST
BUTTON
UP
BUTTON
DOWN
BUTTON
LED
LIGHT
CENTER
BUTTON
COVER
REMOTE
MEASURE 6"
FROM END WHERE
WIRE CONNECTS
BRIDGE
Pella
®
Lifestyle Series Motorized, Integrated Blinds or Shades (continued)
