ECP
300
EXPERT STEPPER
Page 38
OPERATION AND MAINTENANCE MANUAL
Rev. 01-20
GENERAL SAFETY RULES
Whatever the nature of the maintenance, it must only be carried out by specialised technical
personnel.
In the event of failure or maintenance of the electrical system, before proceeding with
any check, the power supply to the panel must be disconnected by placing the main
power switch in the open position (O). Check the absence of voltage with a Tester
before any operation.
Every element of the electrical panel, in the event that it is faulty, must be replaced
exclusively with original parts.
If the intervention involves parts outside the panel, perform the following steps:
❑
Permanently and safely disconnect the power supply to the panel in one of the
following ways:
1)
Turn the main switch of the 300 EXPERT STEPPER to OFF and padlock the
front cover.
2)
Disconnect the power supply upstream of our panel permanently by padlocking
it to OFF.
❑
Place signs to indicate the machine being serviced.
Before proceeding with maintenance operations, perform the following safety
requirements:
❑
The electrical panel must be powerless.
❑
Prevent the presence of unauthorised personnel in the intervention area.
❑
Place appropriate signs to indicate "Machine in Maintenance".
❑
Wear suitable work clothing (overalls, gloves, shoes, headgear) and free of
loose appendages.
❑
Remove any objects that may become entangled in protruding parts of the
panel.
❑
Have available accident prevention means and tools suitable for the operation.
❑
The tools must be well cleaned and degreased.
❑
Have the necessary technical documentation available to perform the
maintenance work (wiring diagrams, tables, drawings, etc.).
❑
At the end of the maintenance operations, remove all residual materials and
thoroughly clean the panel.
It is absolutely forbidden to accommodate additional parts inside the electrical panel.
The manufacturer declines all responsibility
in the event that the points of this chapter are not observed.
CHAPTER 8: MAINTENANCE
8.1
CHAP. 8 - Maintenance
