ECP
300
EXPERT STEPPER
Page
19
OPERATION AND MAINTENANCE MANUAL
Rev. 01-20
KEY COMBINATIONS
+
1ST-LEVEL PROGRAMMING
If pressed simultaneously for more than 3 seconds, they allow
access to the first level programming menu.
LEAVING THE PROGRAMMING
If pressed simultaneously for more than 3 seconds within any
programming menu.
+
+
2ND-LEVEL PROGRAMMING
If pressed simultaneously for more than 3 seconds, they allow
access to the second level programming menu.
The entry in this menu activates the stand-by.
+
3RD-LEVEL PROGRAMMING
(EEV parameters)
If pressed simultaneously for more than 3 seconds, they allow
access to the third level programming menu.
The entry in this menu activates the stand-by.
+
4TH LEVEL PROGRAMMING
(stepper valve parameters)
If pressed simultaneously for more than 3 seconds, they allow
access to the fourth level programming menu. The entry in this
menu activates the stand-by.
+
QUICK MENU FOR VARIABLE DISPLAY
(READ-ONLY)
If pressed simultaneously for more than 3 seconds, they allow
access to the quick variable display menu.
Within this menu the up and down arrows allow the display of
the variable label.
Pressing the Set key toggles the display of the label with its
value.
When the label value is displayed, pressing the up or down
arrow alternates the value display for the label display.
The leaving from this menu takes place automatically after 2
minutes of keyboard inactivity or by pressing up arrow + down
arrow.
SWITCHING ON THE ECP300 EXPERT STEPPER PANEL
After completing all the electrical panel wiring connections, power the panel using the
general switch; the electrical panel will emit immediately a sound for a few seconds and at
the same time, all the LEDs will remain lighted on the display.
CHAP. 5 - Data programming
5.5
5.4
