VISION
TOUCH
PAN
Pag. 44
USER AND MAINTENANCE MANUAL
Rev. 01-19
AUTOMATIC PROGRAMS - Automatic cycle
The "automatic cycle" is displayed automatically after a program is started, if the prepared
product time is correct. At the end of the program or when the STOP button is pressed, the
"Manual mode" screen is automatically displayed.
The page is split into 2 main sections:
•
Progress of the program:
this section contains the progress graph of the temperature
setpoints; the phases that have already been performed and the current one are
coloured, whereas the ones left are in grey. The icon, name and time and date of the
prepared product are also indicated.
•
Summary bar of the current phase:
the current phase is indicated by an arrow.
Stop program:
Ends the current program and returns to the "Manual status" page.
Stop
Progress of the program.
Summary bar of the current phase:
contains the measured temperature and humidity values, the setpoints, the remaining time for the
current phase to end and the STOP button to stop the program. "CHANGED" appears if the current
values of the setpoints are different from those set in the program.
6.6
