VISION
TOUCH
PAN
Pag. 10
USER AND MAINTENANCE MANUAL
Rev. 01-19
INSTALLATION AND ASSEMBLY
Fig. 1:
Install the 100N MASTER3
module on the DIN guide and
close the bottom clamps to hold
it in place.
Fig. 2:
VISION TOUCH
console drilling
template.
Fig. 3:
Configure properly the side switch
(if present) to reverse the viewing
angle of the display. This allows you
to mount the
VISION TOUCH
at any
height.
When mounted in the low position,
rotate the display by 180 ° in order
to have the signal leds at the top.
2.3
177mm
1
36
mm
