Peff DIRECTRE, Руководство по эксплуатации

Страница: 14 / 26

Summing Bus/Mixer
Directre can combine different signals like a mixer or Spider Audio. Technically this is
not a full fledged mixer, because panning and fx send functionality is omitted from the
design, however the Channel Switches can be configured for mute or solo action via
MIDI. This 8x1 summing bus configuration is the most common way to use Directre.
Incoming signal sources are connected to the Channel 1 - 8 DIRECT IN sockets. These
signals pass through the Channel Switches and are combined on the summing bus
which passes to the MIX OUT sockets.
The Channel Enable Button now function as Mute controls (in reverse). Also MIDI Note
messages can be used to trigger a solo function so that only one of the input signals
passes to the summing bus.
In this application, the MAIN IN and DIRECT OUT connections are not used, and
therefore the distribution bus is completely out of the signal path.
v1.0.1 operation manual
14