Peff DIRECTRE, Руководство по эксплуатации

Страница: 9 / 26

Channel Controls
VU METER
Each Channel on Directre has a VU Meter that displays the
signal level, post-switch, and post-gain.
INDICATOR LAMP
The Yellow Lamp under the VU indicates the status of the
switch.
ENABLE BUTTON
The large button on each channel triggers the switch on or
off.
XFADE SELECT
You can select one of two fade in - fade out times for each
channel.
GAIN KNOB
The Level scaling ranges from – ∞ dB to +6dB with a center
detent at 0dB unity gain.
v1.0.1 operation manual
9
Tip: Put Directre in a combinator, and map a rotary control to two Channel Gain
knobs. Set the modulation on one to a minimum value of +6dB and a maximum
value of -inf dB. This creates an even crossfader between the two channels.