Peff DIRECTRE, Руководство по эксплуатации

Страница: 11 / 26

Signal Flow
The signal path through Directre is rather unconventional, primarily because it is
designed to serve three main applications. Rather than creating three separate Rack
Extension devices, the signal path is designed to handle multiple tasks dependent on
how sound modules and effect devices routings.
A signal connected to the MAIN IN sockets is routed to a distribution bus that feeds the
signal to eight channels. The eight channels pass through their respective CHANNEL
SWITCHES and then are mixed on a summing bus that connects to the MIX OUT
sockets.
If a sound source is connected to a DIRECT IN socket, the signal from the MAIN IN is
disabled to the channel. When a Channel DIRECT OUT socket is connected to
another device, the Channel signal is taken off the summing bus that goes to the MIX
OUT sockets. You can completely bypass the distribution and summing buses by
connecting a source to the DIRECT IN and routing the DIRECT OUT to a different
signal path.
In the following pages, this manual will describe in better detail the practical applications
of this design.
v1.0.1 operation manual
11