Peff DIRECTRE, Руководство по эксплуатации

Страница: 10 / 26

Global Controls
QUANTIZE
This knob will set the synchronization resolution of the
channel switches. The BAR resolution is synchronized to
a measure. BEAT setting synchronizes the switches to
the time signature division. In most cases this is a 1/4
note. 1/8 setting synchronizes to an eighth note. The
OFF setting disables synchronization, and the channel
switches activate instantaneously.
XFADE TIME A & B
These controls set the global crossfade times. Both
controls have a range of zero milliseconds (0ms) to six
seconds (6000ms). By default, each channel is set to
XFADE TIME A.
The fade in starts when a channel switch is activated, and
the fade out starts when a channel switch is deactivated.
This means the audio signal will fade out after the channel
switch lamp goes off, and you will see the VU meter show
the signal levels taper down.
v1.0.1 operation manual
10