Peff DIRECTRE, Руководство по эксплуатации

Страница: 12 / 26

Splitter
Directre can act as a 1x8 channel splitter, similar to the concept of the Spider Audio
Splitter which is a 1x4 audio splitter. With Directre, you can take one input signal and
connect it to eight different signal paths. For example, you can take a Thor Synthesizer
and route it to several reverbs, delays, compressors, etc. to create a heavily layered
tone. In this manner, Directre becomes an FX send bus.
A signal connected to the MAIN IN sockets is routed through the distribution bus to the
eight channels. The DIRECT OUT sockets are then the taps from the splitter which are
then connected to various target devices or mix channels. In this configuration, the
summing bus and MIX OUT are not used, nor are the DIRECT IN sockets.
The Channel Enable buttons should be ON for the signals to pass to each of the splitter
taps.
For a splitter configuration, the DIRECT IN sockets and MIX OUT sockets are not used,
which means the summing bus is completely bypassed.
v1.0.1 operation manual
12