
73
Table 3
Table 4
Control State Descriptions
STATE
State Name
Description
Decimal
Hexadecimal
0
0x00
RESET_0
Initialization
1
0x01
RESET_1
Initialization
2
0x02
STANDBY_0
Standby waiting for heat demand
3
0x03
SAFETY_ON
Ignition Sequence
4
0x04
SAFETY_OFF
Ignition Sequence
5
0x05
PRE_PURGE
Ignition Sequence
6
0x06
PRE_PURGE_1
Ignition Sequence
7
0x07
IGNIT_0
Ignition Sequence
8
0x08
IGNIT_1
Ignition Sequence
9
0x09
BURN_0
Following Boiler Demand
10
0x0A
POST_PURGE_0
Purging Combustion Chamber
11
0x0B
POST_PURGE_1
Purging Combustion Chamber
12
0x0C
PUMP_CH_0
Following CH Demand w/o Heat Input
13
0x0D
PUMP_CH_1
Post Purge Pumping after CH Demand
14
0x0E
PUMP_HW_0
Following DHW Demand w/o Heat Input
15
0x0F
PUMP_HW_1
Post Purge Pumping after DHW Demand
16
0x10
ALARM_1
Error Handling
17
0x11
ERROR_CHECK
Error Handling
18
0x12
BURNER_BOOT
Controller (re)start
19
0x13
CLEAR_E2PROM_ERROR
Error Handling
20
0x14
STORE_BLOCK_ERROR
Error Handling
21
0x15
WAIT_A_SECOND
Error Handling
The following example describes how to read the temperature holding registers (byte 4-7 and 14-15). The boiler supply and return
temperatures can be read by issuing a Modbus command to read holding register “0x0004”. If the word value returned is
“0x1D17”, then we know that the high byte is “0x1D” and the low byte is “0x17”. Converting 1D to decimal, we get 29. Using
the formula above to convert to degrees Celsius we get, 4.5°C (40°F). Similarly, the return temperature is found by converting the
hexadecimal 17 to decimal 23. Using the formula above, this is equivalent to 1.5°C (35°F).
Control Status Descriptions
STATUS
Status Name
Description
Decimal
Hexadecimal
0
0x00
STANDBY
Standby waiting for Heat Demand
14
0x0E
BLOCK
Error Handling
10
0x0A
ALARM
Error Handling
15
0x0F
FROST_PROTECT
Freeze Protection Demand
16
0x10
CH
Central Heating Demand
17
0x11
RESET_STATE
Initializing
18
0x12
STORAGE
DHW Demand
19
0x13
Not Applicable
Not Applicable
20
0x14
Not Applicable
Not Applicable
21
0x15
STORE_WARM_HOLD
DHW Demand (Store Warm Hold)
APPENDIX D. 852-1 INTERFACE ADAPTER
Содержание PUREFIRE PFW-199
