29 of 36
ISSUED: 07-24-12 SHEET #: 180-9025-1
Notes:
1.
Audio and video sources will switch simultaneously whether using the remote
or Power/Source Selection Button.
2.
Independent audio switching is only allowed for AV and PC audio.
3.
Inputs on the Transmitter and Receiver can be switched by pointing the
remote at the Transmitter or Receiver ONLY if the connection between
Transmitter and Receiver has been established, Link Indicator Light on.
If the connection between Transmitter and Receiver has not been established,
the inputs need to be selected at the location of each unit using either of the
above input and output selection methods.
Indicator Lights Decoded
Receiver
•
Power/Link Indicator Light
º
Rapid Flashing – Switching from Wireless to LAN or from LAN to
Wireless connection or performing
fi
rmware update.
º
Flashing – Units are booting and establishing a secure connection for AV
transfer.
º
Solid – Successful connection has been established between Transmitter
and Receiver.
• HDMI,
COMPO,
AV
- The Indicator Light will be solid for the selected port
as long as output cable is present and connected to the output device. If no
output device is connected to the selected output port, the Indicator Light will
be
fl
ashing.
