10 of 36
ISSUED: 07-24-12 SHEET #: 180-9025-1
Remote Control
Remote Control Functions
1. POWER -
Turns the Transmitter and Receiver power ON/OFF.
•
ON: If the Transmitter and Receiver are powered off and the Power/Link
Indicator Light is on, press the power button pointed at either unit to turn on
both units at the same time (this will take about 30 seconds).
•
ON: If the Transmitter and Receiver are powered off and the Power/Link
Indicator Light is off, each unit will need to be turned on separately. Point the
remote at each unit's IR Input Port and press the power button to turn on. (this
will take about 1 minute and 30 seconds).
•
OFF: If the Transmitter and Receiver are powered on and the Power/Link
Indicator Light is on, press the power button to turn off both units at the same
time to put the system in Standby mode. The Power/Link Indicator Light will
remain on.
•
OFF: If the Transmitter and Receiver are powered on and the Power/Link
Indicator Light is on, press and hold the power button for 8 seconds. Both
Transmitter and Receiver will be turned off at the same time. The Power/Link
Indicator Light will turn off.
Note:
If the Transmitter and Receiver are powered on with the Power/Link Indicator
Light
fl
ashing, both units will need to be powered off individually.
1
3
4
5
2
6
