22 of 36
ISSUED: 07-24-12 SHEET #: 180-9025-1
Step 9
Once clicking on
Save Changes
,you will be prompted to save your system
con
fi
gurations. Con
fi
rm that you would like to save them by clicking the
Save
button.
You will be prompted again to make sure you want to save these changes. Con
fi
rm
that you would like to save them by clicking the
Save
button again.
Step 10
Unplug the RJ45 cable from the HD Flow Pro Wireless Multimedia Receiver 1. At this
time Receiver 1 can be unplugged from power.
Congratulations! You have completed programming of the fi rst Receiver and are
ready to move to the next Receiver.
Receivers 2+ Multicast Programming
Multicast Receiver 2, 3 and 4 Settings Overview
Follow the steps 1-8 from Receiver 1 programming using the below corresponding
Receiver settings. During Step 6, reference multicast programming instructions
for Receivers 2, 3 and 4 below. After Step 6 follow Multicast Receiver 2, 3, and 4
Programming Instructions below.
Multicast Receiver 2 Settings -- should be as follows:
Ethernet IP: 192.168.0.153
Ethernet NetMask: 255.255.255.0
Gateway: 192.168.0.1
Streaming Mode: Multicast (Second option in the drop down menu. Once you
select Multicast you will be able to modify the WiFi RXID)
WiFi RXID: Slave2
WiFi SSID – ITRIO_XXXX (XXXX should be the SSID of the Transmitter, note the
SSID is case sensitive.)
Group IP (multicast): 227.2.2.7
Peer IP(LAN): 192.168.0.151
