17 of 36
ISSUED: 07-24-12 SHEET #: 180-9025-1
Your computer is now set up to communicate with the HD Flow Pro Wireless
Multimedia Transmitter and Receiver.
Note:
When programming is completed, you will need to return your network settings
back to original.
Transmitter Start-Up and Connection
Step 1
Plug in The HD Flow Pro Wireless Multimedia Transmitter and ensure it has fully
started up (top indicator light and one input indicator light will be blinking).
Step 2
Connect the RJ45 cable to the computer.
Step 3
Connect the other end of the RJ45 cable to the Transmitter or Receiver and follow the
appropriate instruction below. Read the entire instruction below before proceeding.
Transmitter Multicast Programming
Step 1
Open your preferred browser.
Step 2
In the address bar
of the browser type
192.168.0.151
and press
enter.
You will be taken to the
programming site for the
Transmitter.
Note:
Transmitter Ethernet
IP is always 192.168.0.151
