30 of 36
ISSUED: 07-24-12 SHEET #: 180-9025-1
Factory Reset
CAUTION
Factory reset will revert all settings to factory defaults. It is not recommended
to perform factory reset on multicast systems (systems that have two or more
Receivers). If there are issues with multicast system please reference http://
www.hdfl ow.com/Tech-Support or call Technical Support at 1-800-865-2112.
Step 1
Unplug the Receiver from its power source.
Step 2
Press and hold the Power/Source Selection button on the front panel. While pressing
the Power/Source Selection button on the front panel, plug in the DC power back into
the unit being reset.
Step 3
Keep holding the Power/Source Selection button until the Indicator Lights on the
Receiver are
fl
ashing rapidly, approximately 7 seconds.
Step 4
Release the front panel push button and wait for the unit to reset to factory defaults.
Please visit
http://www.hdfl ow.com/Tech-Support/
to view factory reset training
video.
Firmware Upgrade
Visit
http://www.hdfl ow.com/Tech-Support/
for Peer-to-Peer and Multicast
fi
rmware
upgrade instruction videos,
fi
le downloads and unit con
fi
guration.
Notes:
•
HD Flow Pro Wireless Multimedia Kit, Peer-to-Peer units and Multicast
units have been pre-con
fi
gured with the same version of
fi
rmware. When
purchasing additional Receiver(s) it is recommended to check the
fi
rmware
version.
•
Firmware update should only be done when units are functioning properly.
•
During the update, DO NOT TURN THE UNIT OFF OR UNPLUG ITS POWER
SOURCE. Doing so will cause the unit to no longer function properly.
•
During the update process the display device will not show content.
•
Only when the unit(s) have
fi
nished updating and rebooted should the USB
dongle be removed.
Appendix
