manualshive.com logo in svg

Peavey Tube Fex None, Руководство по эксплуатации

Поделиться
Скачать
Peavey Tube Fex None Скачать руководство пользователя страница 7

 

 

Still reading? We consider that very high praise indeed! 

 people don’t want to bother reading manuals,

they’d rather try and figure things out themselves, and that would be unfortunate because in this manual we
try to provide you with the information necessary to make the most use of your new equipment. Not just
technical stuff, but real everyday type 

 that will make using the Tube 

 much more fulfilling.

Have Fun.

This manual is separated into several distinct chapters.

Chapter 

1, 

Setup, 

will show you how to setup the Tube Fex in several common application scenarios.

Chapter 2, 

Overview, 

provides an overview of the Tube Fex ranging from a list of the abbreviations to the

user interface. This chapter is a must, don’t miss it.

Chapter 

 Editing Programs, 

provides an overview of the effect structure, how to create a 

 effects

chain, editing individual effects parameters, storing your program, and more. 

 information that’s not

too technical. You should probably check this out.

Chapter 

 Using MIDI, 

shows you how to setup the Tube Fex to allow for sending and 

 of 

data, how to load programs into new (and their original) locations, storing program via 

 and more. You

should definitely read this chapter, if for no other reason 

 to find out how to set the 

 

 

 

channels, and how to load programs.

Chapter   RAM 

Cartridge, 

deals with saving your programs in 

 and storing them to   RAM cartridge

Useful only if you intend to store programs to cartridge.

Appendix A, 

 is   reference section for those who want more information 

 the effects

than is provided in Chapter   This chapter lists 

 effect, its parameters , and the range for each parameter.

This section provides lots of information that the typical user probably doesn’t need.

Appendix 

 MIDI Implementation, 

is   chart that summarizes the MIDI support provided by the 

 

Appendix 

 System Exclusive Format. At-e you 

sure you want to go 

 

 details the 

 exclusive

 format for the Tube Fex. This is very technical, advanced users will gain 

 most 

 this.

Appendix 

 Remote Editing with 

 shows you how to use system exclusive messages to program

the Tube Fex. Again, this is 

 technical so advanced users will

 gain the most 

 

Intro

Содержание Tube Fex None































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды