manualshive.com logo in svg

Peavey Tube Fex None, Руководство по эксплуатации

Поделиться
Скачать
Peavey Tube Fex None Скачать руководство пользователя страница 47

Speaker 

 

The Tube Fex has four stereo speaker simulation curves:

 2x12 

Open

Simulates the frequency response of an open backed 

 2x12 

Closed

Simulates the frequency response of a closed backed 

 4x12 Cabinet

Simulates the sound of four 12” speakers in a single cabinet.

 4x12 British

Simulates the frequency response of a well known British manufacturer’s guitar
speaker setup.

These speaker simulation curves are convenient for both live performance and recording applications where
the guitar is directly connected to a mixing console.

Tip: 

T o only affect

adding the

what goes out the balanced (direct) outputs

following to the end of vour effects chain:

and have full range going to your cabinet

   

 (use the stereo Effects Send outputs to go to your cabinet)

Stereo Simulator 

A transverse filter approach is used to simulate stereo separation of a mono signal. The mono signal is fed

into a comb filter and the output and input is summed in the right channel and subtracted from the left channel.

The resulting output simulates stereo separation of frequency bands. 

Tune 

adjusts the distance between 

separated frequency bands. There is a 

 filter which, when on, will keep the bass centered between

the two channels. The 

Depth 

of the stereo separation is variable from 

0400%.

Parameters

The 

LP 

 parameter is a 

 filter which, when on, will keep the bass centered

between the two channels. Choose 

ON 

or 

OFF.

The 

Tune 

parameter adjusts the distance between the separated frequency bands.

Range is 

 The 

Depth 

 is the depth of the stereo separation. Range is 

Noise Gate 

The Noise Gate effect is a 

 expander.

The Peak level is determined by the input signal plus attack and decay variables which set the speed at which
the peak can change.

Parameters

The 

Atk 

(Attack Time) parameter is used to remove sharp attack transients. The larger this 

the longer the attack will take to open the gate once closed. 

 O-99.

The 

 (Release Time) parameter adjusts the amount of time it takes a decaying signal to drop

below the threshold. The larger this number the longer it will take for a decaying signal to drop
below the threshold. Range 

Appendix A Individual Effects

A-75

Содержание Tube Fex None































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды